Alleviation of Alcoholic Fatty Liver by Dendrobium officinale Flower Extracts due to Regulation of Gut Microbiota and Short-Chain Fatty Acids in Mice Exposed to Chronic Alcohol.

Alcoholic fatty liver disease (AFLD) is caused by long-term heavy alcohol consumption; therefore, useful and practical methods for the prevention of AFLD are urgently needed. The edible flower of Dendrobium officinale contains diverse flavonoids, and has shown antioxidant activity as well as antihypertensive and anti-inflammatory effects. In this study, an AFLD model was established, the protective effect of D. officinale flower (DOF) ethanol extract on AFLD was evaluated, and its mechanisms were investigated by analyzing gut microbiota and short-chain fatty acids (SCFAs). DOF extract (DOFE) supplementation promoted alcohol metabolism, restored hepatic antioxidant capacity, alleviated oxidative stress, reduced inflammatory factor levels, and inhibited dyslipidemia induced by alcohol intake in chronic alcohol-exposed mice, especially in the high DOFE group. Moreover, DOFE supplementation increased the diversity, structure, and composition of the gut microbiota in mice, restored some of the abnormal SCFA levels caused by AFLD, and helped restore intestinal function. DOFE supplementation significantly increased the relative abundance of Akkermansia, suggesting that Akkermansia may be a potential target of the protective effect of DOFE. Therefore, DOFE supplementation to improve the composition of the gut microbiota may be an effective therapeutic strategy for the prevention of AFLD.

Phytochemical profiles of edible flowers of medicinal plants of Dendrobium officinale and Dendrobium devonianum.

The discovery of new edible flowers that are nontoxic, innocuous flowers having human health benefits, surveys of their phytochemicals and utilization are of great scientific and commercial interest. Dendrobium officinale and Dendrobium devonianum are precious Traditional Chinese Medicine. During the massive commercial cultivation, a lot of flowers were produced and certified as edible flowers, and the phytochemical profiles and bioactivities warrant evaluate. The present study aimed to investigate the phytochemicals and antioxidative activities in flowers of D. officinale (DOF) and D. devonianum (DDF). In total, 474 metabolites were identified using a widely targeted metabonomics method, 16 amino acids and 6 flavonoids were measured using high-performance liquid chromatography (HPLC), and 8 fatty acids were detected using gas chromatography-mass spectrometry (GC-MS). Both flowers contained various amino acids, including 7 essential amino acids, diverse flavonoids, especially quercetin, kaempferol and their derivatives, and high levels of methyl linoleate and methyl linolenate. The relative levels of quercetin, kaempferol and their glycosides were higher in DDF than in DOF, whereas the relative levels of several flavonoids C-glycosides were high in DOF. Ethanol extracts of both DOF and DDF showed antioxidative capacities including the scavenging of 1,1-diphenyl-2-picrylhydrazyl and hydroxyl radicals. Both edible flowers contained flavonoids, amino acids, and fatty acids and have antioxidative activities, which should be explored for use in functional foods and pharmaceuticals.

Effect of inoculation with Penicillium chrysogenum on chemical components and fungal communities in fermentation of Pu-erh tea.

Developing an effective method to improve the quality of Pu-erh tea is of great scientific and commercial interest. In this work, Penicillium chrysogenum P1 isolated from Pu-erh tea was inoculated in sterilized or unsterilized sun-dreid green tea leaves to develop pure-culture fermentation (PF) and enhanced fermentation (EF) of Pu-erh tea. Spectrophotometry and high performance liquid chromatography determined that contents of free amino acids (FAA), total tea polyphenols and eight polyphenolic compounds in PF were significantly lower than these in non-inoculation control test (CK) (P < 0.05), whereas the contents of soluble sugars and theabrownins (TB) in PF were significantly higher (P < 0.05) than in CK. A total of 416 volatile compounds were detected by headspace solid-phase micro-extraction combined with gas chromatography-mass spectrometry. Comparison to CK, 124 compounds in PF were degraded or decreased significantly [Variable importance in projection [(VIP) > 1.0, P < 0.05, fold change (FC) < 0.5], whereas 110 compounds in PF were formed or increased significantly (VIP > 1.0, P < 0.05, FC > 2). Compared with normal fermentation (NF), the levels of gallic acid, (+)-catechin, (-)-epicatechin and 64 volatile compounds in EF were significantly lower (VIP > 1.0, P < 0.05, FC < 0.5), whereas the levels of FAA and 39 volatile compounds were significantly higher (VIP > 1.0, P < 0.05, FC > 2). Amplicon sequencing of fungal internal transcribed spacer 1 (ITS1) revealed that P. chrysogenum P1 didn't become the dominant fungus in EF; while the fungal communities in EF were different from those in NF, in that the relative abundances of Blastobotrys bambusae and P. chrysogenum in EF were higher, and the relative abundances of Aspergillus niger and Kluyveromyces marxianus in EF were lower. Overall, inoculation of P. chrysogenum in unsterilized sun-dreid green tea leaves changed the the fungal communities in fermentation of Pu-erh tea, and chemical compounds in fermented tea leaves, i.e., the levels of TB and the compounds responsible for the stale flavor, e.g., 2-amino-4-methoxybenzothiazole were increased, resulting in improvement of the sensory quality, including mellower taste and stronger stale flavor.

Structural and Secondary Electron Yield Properties of Titanium-Palladium Films with Laser-Treated Copper Substrate for Application in Neutron Generators.

Secondary electron emission (SEE) of the oxygen-free high-conductivity copper (OFHC) target surface in neutron generators limits the stability and improvement of the neutron yield. A novel-type target of titanium-palladium films coated on laser-treated OFHC target substrate was proposed and explored in this work to obtain low secondary electron yield (SEY) without introducing any components. The combination of Ti-Pd films and laser-treated OFHC substrate can effectively suppress secondary electron emission and enhance the adsorption ability to hydrogen isotopes with the existence of Pd film. The surface morphologies, surface chemical states, and SEYs of Ti-Pd films with laser-treated OFHC substrate were studied systematically for the first time. The XPS results showed that the laser-treated OFHC substrate surface was basically covered by Pd film. However, the Pd film surface was partially oxidized, with percentages of 21.31 and 10.02% for PdO and PdO2, respectively. The SEYs of Ti-Pd films with laser-treated OFHC substrate were all below 1 within the investigated primary energy range of 100-3000 eV, which would be sufficient for application in neutron generators. Specifically, the maximum SEY (δmax) of laser-treated OFHC substrate coated by Ti-Pd films was 0.87 with corresponding incident electron energy of 400 eV.

The Effect of Ultrasonic Cleaning on the Secondary Electron Yield, Surface Topography, and Surface Chemistry of Laser Treated Aluminum Alloy.

Laser ablation technique is a novel method for obtaining a surface with a low secondary electron yield (SEY) that can mitigate electron cloud in high-energy accelerators. Before the installation of laser processed aluminum alloy, surface cleaning is of the essence to reduce the contaminations of ultra-high vacuum systems for providing appropriate pressure for beam operation consequently. Laser processed aluminum alloy is one of the crucial candidates for the vacuum system construction of future accelerators. Moreover, ultrasonic cleaning is an essential procedure for most materials applied in vacuum systems. Therefore, in order to verify the stability of the laser created structures by ultrasonic cleaning and evaluate the impact of the cleaning on the SEYs, the surface topographies, and the surface chemistries of laser treated aluminum alloy, SEY measurements and related tests were performed. After ultrasonic cleaning, the SEYs of laser treated aluminum alloy increased from 0.99, 1.05, and 1.16 to 1.43, 1.74, and 1.38, respectively. Compared to the surface roughness of uncleaned laser treated aluminum samples, the cleaned laser treated ones decreased from 10.7, 7.5, and 14.5 to 9.4, 6.9, and 12.9, respectively. The results indicate that ultrasonic cleaning can induce the SEY increase of laser processed aluminum alloy. The correlative mechanism between the surface morphology, the surface chemistry, and SEY increase were analyzed for the first time.